Solflex Radiator Reflector Foil

Heat reflective foam roll that can be placed behind radiators. One-sided aluminum film cover, heat reflecting foam. You can easily cut it to whatever size you need with scissors or a knife. It also acts as a vapor barrier.

The wall behind the radiator warms up, which is a loss of heat. But if you place the Solflex foam behind the radiator, it will reflect the heat back, so the energy won't be wasted for warming up the wall. The result: about 8-15% energy saved. You can use it anywhere indoors, if there is a little room for air between the cover and the film.

Warning! Cannot be placed behind gas convector heaters!

Thickness: 3 mm.
Width: 60 cm.
Length: 4 m.

How to use it?

1. Mark out the place of the film, cut to size if needed.
2. Use a double sided tape to glue the foam on the wall (or if you don't have any, fix it with nails). Put the self-adhesive tape on the edges of the foam side, then place it on the wall.

How does it work?

It's really easy: The radiator trasmits heat in every direction equally. This means, that the backside of the radiator heats the wall primarily, which is a waste of energy. By using this heat-reflecting roll, you can save the energy and use it to actually heat up the room.